MaxAmps Trick New Multi-Voltage System

Posted on Tuesday, July 27, 2010 at 3:18 PM by JamesR

From MaxAmps:

"MaxAmps is proud to announce this BRAND NEW technology for the sophisticated rc enthusiast. Get any voltage you want, all in one pack. Run 2S stock setups, 3S brushless setups, 4S brushless setups, and 5S or 6S 8th scale setups all with the same pack! This product comes standard with one single cell module, one main lead, one charge lead, two parallel charging connectors, and two velcro straps. One series connector and two parallel charging connectors will be added for each additional cell purchased. Choose additional cells and main lead plug from the drop-down menus.


• Each cell is its own individual module for easy deconstruction and reconstruction of your packs in seconds.
• With our Multi-Voltage(MV) packs, you can adjust your voltage depending on your application.
• Perfect balancing on every cycle, better than any balance charger, with the new parallel charging system available only with these new MV packs.
• You do not need a balance charger for the MV packs because you are parallel charging as a single 1S pack on every cycle using the included parallel charging connectors.
• With our Multi-Voltage packs, if one cell fails, you simply replace it with another single cell module and you are racing again.
• Each single cell unit has a hard plastic case built in under the shrink wrap for added durability.
• You get the highest performance using parallel charging for perfectly balanced cells on every cycle.
• Add as many cells as you want in series for running in your vehicle or in parallel to charge the single cell units."

Check it out at: http://www.maxamps.com

There's a New Slayer in Town

Posted on Thursday, July 08, 2010 at 10:43 AM by JamesR

There's a New Slayer in Town

Traxxas has just released the next generation Slayer Pro 4x4 nitro short course truck! Featuring a new 30mm longer extended chassis and wide-track suspension that adds 26mm of width, the Slayer Pro 4x4 packs even more highlights including their "Traxxas Link" 2.4gHz radio system, new high-torque waterproof servos, and new hard-anodized Teflon-coated GTR shocks. Powered by a Traxxas Extreme TRX 3.3 engine, the Slayer Pro is available in 3 new body styles with officially licensed BFGoodrich and Kumho replica tires.

Slayer Pro 4X4 #5907
web: http://www.traxxas.com

RC10B4.1 Factory Team Kit 1:10 Scale 2WD Electric Off-Road Competition Buggy Kit

Posted on Tuesday, July 06, 2010 at 1:51 PM by Carl Hyndman

The B4 platform is undefeated on a world level since its release in 2003, winning four I.F.M.A.R. World Championships (2003- Billy Easton; 2005- Neil Cragg; 2007- Hayato Matsuzaki; 2009- Martin Achter). The B4 has also carried Ryan Cavalieri to four straight R.O.A.R National Championships in Modified Buggy. With an unprecedented pedigree of World, National, and European titles behind them, the B4 development team spent countless hours to refine the B4 to produce the B4.1 Factory Team kit.

Team Associated’s Area 51 designers optimized the B4.1 Factory Team kit for the latest generation of racers whose cars are lighter and more powerful than ever due to the advent of new LiPo battery and brushless motor technology. With its race-ready components, Factory Team parts, and optimized suspension setup for use with LiPo batteries, the B4.1 Factory Team buggy puts it’s World Champion pedigree to work for you, lap after lap!

RC10B4.1 Factory Team Kit Features:
• 4-Time I.F.M.A.R. World Champion and 5-Time R.O.A.R. US National Champion!
• Factory Team 0.5° aluminum rear hubs with oversized outer bearing
• Ball differential with lightweight outdrives
• Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
• V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
• Pro-Line Vortex body and wing
• Pro-Line M3 Holeshot 2.0 rear and M3 4-rib front tires
• CVA drive shafts with pin retainer clips
• Durable steel center-drilled front axles
• Carbon-fiber battery strap with blue aluminum thumb screws
• Optimized suspension setup for use with LiPo batteries
• Suspension mounts for 4°, 3.5°, 3°, and 2.5° rear toe included
• Blue titanium turnbuckles
• Complete set of precision ball bearings
• Factory Team blue aluminum hinge pin brace, milled motor plate, servo mounts and much more!

#9036
B4.1 Factory Team Kit
MSRP: $399.99
UPC: 784695 090361

web site:
www.RC10.com

Tamiya Wins IFMAR Worlds

Posted on Tuesday, July 06, 2010 at 11:44 AM by DerekB

Did you know there was an ISTC IFMAR worlds happening? Most didn't know, or seem to be aware, but for Tamiya it was a good weekend. Marc Rheinard took his Tamiya TRF416X to the tallest spot on the podium for his 2nd IFMAR title in a row (he won in 2008) and also his 3rd title overall (he also won in 2004)! Congrats to Tamiya and Marc!

http://www.tamiya.com/english/info/100705trfworlds/index.htm

HPI Mini-Trophy Desert Racer Details!

Posted on Thursday, July 01, 2010 at 3:07 PM by MikeV

After a visit to HPI HQ today we gathered more information on the new 1/12-Scale Mini Trophy coming from HPI. This is not a replacement for the Blitz, heck it's not even a Short Course truck. It's modeled after an actual Desert Race truck. In an interesting partnership HPI and TSA Motorsports have been working on parrelel courses, TSA on the 1:1 truck and HPI on the 1:12. After taking a good look at the Mini-Trophy here are some key points:

RTR Ready-To-RUN = FUN!
Desert Truck Body
Realistic looking three piece body with 1:1 replica race team graphics with windows to show driver figure set
Shaft drive 4WD
4WD for high grip on any surface and the durability of shaft drive
Metal Gear Differentials
Tough metal gears for strength and durability
Steel Dogbones
Tough Steel Dogbones on all four corners
Aluminum Suspension Uprights
High strength aluminum front and rear uprights
Aluminum Hubs
Greater strength and durability
Realistic Desert Racing Tires
Officially Licensed Yokohama Geolandar Tires
4 Wheel Independent Suspension
Soaks up the ruts and bumps of desert terrain
Oil filled shocks
Oil filled shocks for smooth suspension dampening
Threaded Shock Bodies
Easily adjustable threaded shocks for quick ride height changes
Realistic Spare Tires
Two lightweight faux-spare wheels/tires are mounted in the truck bed for realistic desert truck looks
Realistic Interior with Two Driver figure set featuring an interior that includes a driver and navigator for the ultimate in realism. Say hello to our two friends!
Adjustable Slipper Clutch
The included slipper clutch protects the drivetrain and can be adjusted to suit track conditions
Complete Ball Bearings
A complete set of ball bearings is included for drivetrain efficiency and low maintenance
Skid Plate Bumpers
Front and rear skid plate bumpers for realistic looks and crash protection
Adjustable Body Mounts
Adjustable body mounts to help fine tune the body height and width
Tough Chassis
High strength nylon tub chassis for durability
Roll Cage
Complete interior roll cage for scale looks and crash protection
Compatible Wheels
1.9" wheels with 12mm hex hubs allow you to use a wide variety of aftermarket wheels
12mm Hex Hubs
Industry standard for compatibility with a wide variety of optional wheels
Desert Truck Suspension
Realistic looking desert truck suspension arms for high grip and scale looks
Window box to show scale appearance
Specifications:
Length: 21" - 533.4mm
Width: 9 3/16" - 233mm
Wheelbase: 12 9/32" - 312mm
Height: 6 3/8" - 162mm



Overall the truck has a very scale look and feel. We'll be anxious to get it out on the dirt. The new kit should be available in late July or early August, the estimated street price will be somewhere between $240 and $260 but that's not official.

http://www.hpiracing.com/press/103034.html