thats looking pretty awsome can't wait to hear how it drives i like that body

the lug

HPI SAVAGE X SS
DURATRAX EVADER ST PRO with sidewinder 4600
TEAM ASSOCIATED RC10B4
SPORTWERKS E-CHOAS
Duratrax Evader EXT
HPI E firestorm
Lovin' R/C till I die (probally form breathing too much dust and burnt nitro) or cuz some one got fed up with my spelling
"all the important decisions in our lives are accompanied by manic laughter"

thanks man.. yea i hope it drives good.


Finally I'm finished with this project...well for now..

I spent all yesterday trying to figure out why the center diff wasn't turning the rear diff smoothly. I ended up having to shim it with a spacer plate I made out of a divider you would find in fishing takkle box. I also replaced the rear out put on the center diff with the stock Rc8 outdrive and epoxied a pin in the output shaft of the revo diff. This is much smoother. I just up it will hold up. Last night I stayed up till about 3:30 doing finishing touch type of stuff like counter sinking the chassis, making body mounts,installing sway bars, making a extra battery compartment part, and generally making sure everything was ready for testing. I finished everything up this morning and packed it up and took it to the post office.. Should get to my friend on thursday. I was going to insure it.. but they said if it got lost I would need a receipt to make a claim with usps. Well how the heck do you have a receipt for a custom creation??? Anyway.. took a couple last pictures of it before I sent it out.. The creator with the creation

well when traxxas releases it you can use the MSRP as your insurance claim cuz we all know they're gunna try their best to snag this puppy. can't wait to hear how it tears up the track

the lug

HPI SAVAGE X SS
DURATRAX EVADER ST PRO with sidewinder 4600
TEAM ASSOCIATED RC10B4
SPORTWERKS E-CHOAS
Duratrax Evader EXT
HPI E firestorm
Lovin' R/C till I die (probally form breathing too much dust and burnt nitro) or cuz some one got fed up with my spelling
"all the important decisions in our lives are accompanied by manic laughter"

haha thats very true lug.

My friend got the buggy today.. so when he sends me pics of it with electronics in it I will post them up.

After 3 days of driving and 1400 miles I'm back in Colorado. I got moved into my new room. The basement in my new house is unfinished so my parents said I can put my room and workshop down their. Figured I would show you guys some pictures. Should have plenty room to spread out.

Now that I got set-up I'm going to start making a one piece upper chassis for the Evo8..Chewie (my friend who I sent the buggy to) let me know their is too much flex in the chassis. Too much for him to drive it. We are afraid if he did drive it the front end would get crushed. So I'm going to be making a one piece upper deck to replace the front and rear upper decks. I will also be doing some new thicker chassis braces. Haven't been able to get a hold of my friend to see if he has installed electronics. I'll pictures up once he gets that done. Then pictures of the upper deck. Once my buddy gets the new upper deck installed he will start the testing.

Great looking project.